Tag Archives: Machining

Walther KK500 Action in a High Figured Claro Walnut Stock

This action is meant to be put into a metal stock. In order to make the transition from a metal to wood stock I needed to make the appropriate pieces. Take a look at this piece of wood. It’s another … Continue reading

Posted in Rifle Building | Tagged , , , , , | Leave a comment

Older Wichita Action with Newer Stock

Made an adjustable trigger shoe for a Kenyon Trigger. The stock has been custom modified the way the owner wanted it to be. This is a Claro Walnut stock with fine fiddleback.

Posted in Cheekpiece, Highpower, Inletting, Long Range, Rifle Building, Rifle Restoration, Stocks, Target Shooting, Trigger Guard | Tagged , , | Leave a comment

European Walnut Smallbore Rifle

I am converting this rifle stock from left handed to right handed.  This was a Clifford Pierson stock for an Anschutz rifle.  I’ve added the pistol grip cap to lengthen the pistol grip so that the hand will be more … Continue reading

Posted in Rifle Building | Tagged , , , , | Leave a comment

Gustin Canted Stock Inletting for a K. Kenyon Barreled Action

This is a Karl Kenyon action. I am not sure how many he made. I am hoping to have this completed for the Made in America Match at Camp Perry July 24th through 28th.

Posted in Rifle Building | Tagged , , , , | 1 Comment

Wayne Forshee wins Second Day Rocky Mountain Palma match

Congratulations to Wayne Forshee, winner of the second day of the Rocky Mountain Palma match in Raton, New Mexico on July 7th. Wayne used one of the stocks that I made, and it was featured here on my website many … Continue reading

Posted in Rifle Building | Tagged , , , , | Leave a comment

Rebluing an Old Mauser Receiver

This started out to be a small project to rework an old Mauser to make a hunting gun. Like all things it turned into a larger project. I decided to clean up the rust a bit and make it look … Continue reading

Posted in Rifle Building | Tagged , | Leave a comment

22 Rimfire English Walnut Prone Stock Finished

Posted in Benchrest / Bench Rifle, Cheekpiece, F-Class, Inletting, Long Range, Palma, Rifle Building, Rimfire | Tagged , , , , | 2 Comments

F-Class Low Rider

Checking the fit of the bedding block in the stock.  The bedding block will also add rigidity to the stock. Machining the bedding block for BAT action

Posted in F-Class, Palma, Rifle Building | Tagged , , , , | Leave a comment

Finished English Walnut Palma Rifle Stock

 

Posted in Cheekpiece, Inletting, Rifle Building | Tagged , , , , | 2 Comments

Offset Sight Bases for Scope Prototype #2

I have found that it was more difficult to use the scope than the iron sights, so I am making a set of offset sights for the scope.

Posted in Rifle Building | Tagged , , , , , , | 4 Comments

Offset Sight Bases for Scope Prototype #1

Posted in Rifle Building | Tagged , , , , | Leave a comment

US National Rifle Team Award

Presented to Doan in Phoenix at the Arizona State Palma Champtionship Match on December 5, 2010. “Many years ago I acquired the rifle that Danny Sanchez shot in the Palma match that was won by the US.   I hope … Continue reading

Posted in Long Range, Palma, Rifle Building, Veteran's Team Palma Rifle | Tagged , , | 1 Comment

Machining Trigger Guard

 

Posted in Rifle Building | Tagged | 1 Comment

Bedding English Walnut Palma Rifle

Posted in Long Range, Palma, Rifle Building | Tagged , , | Leave a comment

Burled Walnut Prone Anschutz Rifle

Posted in Rifle Building | Tagged , , | 1 Comment

F-Class Rifle Low Rider Forend Machining

Posted in F-Class, Rifle Building | Tagged , , , | Leave a comment

English Walnut Palma Rifle

Finishing up the shadow line.

Posted in Rifle Building | Tagged , , , , | Leave a comment

Curly Maple Palma Rifle

       

Posted in Rifle Building | Tagged , , | Leave a comment

Palma Stock ~ English Walnut

Posted in Rifle Building | Tagged , , | Leave a comment

Inletting for Trigger ~ Stolle Swindelhurst w/ Anschutz Trigger Assembly

Posted in Inletting, Rifle Building | Tagged , , , , | Leave a comment

Savage Bolt Face and Lugs

Even though this is a floating bolt head, it is still necessary to true the bolt head.  After lapping the lugs and bolt face, notice that the Savage dimple is gone.  This should slow down ‘blowing or blanking’ primers.

Posted in F-Class, Rifle Building | Tagged , , , | Leave a comment

Scope Rail and Rings for Smallbore and Long Range Rifle – Unfinished Prototype

This has been one of my chief rants over the last couple of years… that the advent of the new rails and rings, which are actually pretty high quality, add so much height to the shooting position, that when you … Continue reading

Posted in Rifle Building | Tagged , , , , , , , , , | 4 Comments

LowRider F-Class Stock

Building a Forend for F-Class Gun to Reduce Ride Heigth

Posted in F-Class, Rifle Building | Tagged , , | Leave a comment

Inletting Laminate F-Class Rifle Stock

Posted in F-Class, Rifle Building | Tagged , | 1 Comment

F-Class TR Stock Finished

This is a right hand stock with a left handed action.

Posted in Cheekpiece, F-Class, Inletting, Rifle Building | Tagged , , , , | 2 Comments