Category Archives: F-Class

Removing Material for Thumbwheel F-Class Rifle

After this I use a Miller bit to smooth out the slot.

Posted in Cheekpiece, F-Class, Rifle Building | 1 Comment

Savage Bolt Face and Lugs

Even though this is a floating bolt head, it is still necessary to true the bolt head.  After lapping the lugs and bolt face, notice that the Savage dimple is gone.  This should slow down ‘blowing or blanking’ primers.

Posted in F-Class, Rifle Building | Tagged , , , | Leave a comment

Cutting Action Screws to Length ~ F-Class Laminate

Posted in F-Class, Rifle Building | Tagged , | Leave a comment

Installing Escutcheon for Butt Plate ~ Laminate F-Class

Posted in F-Class | Leave a comment

LowRider F-Class Stock

Building a Forend for F-Class Gun to Reduce Ride Heigth

Posted in F-Class, Rifle Building | Tagged , , | Leave a comment

Inletting Laminate F-Class Rifle Stock

Posted in F-Class, Rifle Building | Tagged , | 1 Comment

F-Class TR Stock Finished

This is a right hand stock with a left handed action.

Posted in Cheekpiece, F-Class, Inletting, Rifle Building | Tagged , , , , | 2 Comments

Curly Maple F-Class Prone Rifle Finished

Posted in Cheekpiece, F-Class, Inletting, Rifle Building | Tagged , , , | 5 Comments

Curly (Quilted) Maple Rifle Stock – Mike C

First coat of finish.

Posted in Cheekpiece, F-Class | Tagged | Leave a comment

Quick Disconnect Cheek Piece with Magnet for TR and F-Class Rifle

Posted in Cheekpiece, F-Class, Rifle Building | Tagged , , , , | Leave a comment

Inletting and Bedding ~ Barnard F-Class Rifle

Posted in F-Class, Inletting, Rifle Building | Tagged , , , | 1 Comment

Bedding Block and Recoil Lug ~ Barnard F-Class Rifle

Typically, the Barnard action is bedded with either a round screw in the center of the action, or a square bedding block in the middle screw on the action.  Since this is an F-Class rifle with a heavy barrel, I … Continue reading

Posted in F-Class, Inletting, Rifle Building | Tagged , , , | 1 Comment

F-Class Stock

This is an exhibition grade piece of fiddleback maple.  The blank was too narrow to make the 3″ width necessary for the fore end, so I am inlaying walnut strips to bring it up to the proper width.  I’ll put … Continue reading

Posted in F-Class, Rifle Building | Tagged , | 3 Comments