Doan Trevor Custom Rifle Building

I took final picture of something!!!!

Here’s the whole project finished put back together.

I had a request to replace the original sporter stock with a Schutzen stock and palm rests.

Will posted finished picture soon.

I decided to put a bedding block that looks pillar bedding once it is completed.

Took pictures of the companion stock that I finished (on my birthday this Summer). Owner loved the previous pistol grip.. I replicated it on the companion stock.

(Apparently, Doan likes to take selfies in reflection of things. :D)

The owner of THIS STOCK wanted a matching stock for his F-Class rifle.

The movie below shows me finding the center line on a stock.

I made a 3″ adjustable front slider, then milled a rear slider onto the stock. Tried to match new sliders finish to the original CZ finish. The large piece of aluminum is used to align the rear slider.

The wife of the owner of this updated stock was nice enough to graciously send me photos of the finished product. 🙂

I had someone come to me that liked their current stock.. and wanted it to have an adjustable cheekpiece. So, I went to work. The photos below show what is really inside this older stock. I refilled the stock in places that it needed to be refilled when I was successful in completing this modification. I was so pleased that everything worked out to plan, that it went back to the owner sooner than I planned. Therefore, I forgot to take final pictures.

Here’s the final stock. It has adjustable cheekpiece and buttplate.

Pistol grip cap is a mix of bloodwood and ebony.

Recently, duplicated this Claro Walnut Stock. Its new owner has requested a Barnard Action be dropped into it. Made the bedding block to do this. It will have an adjust cheekpiece and an adjustable buttplate.

Congratulations, My Friend! You did it again!

I have had the privilege of building Trudie’s rifles for the last few years.

Not much for me to say, the video below says it all.

CLICK HERE FOR VIDEO

This year I entered this Spinning Wheel into the New Mexico State Fair.

I did this in my spare time between all of the other projects.

I made spinning wheels years ago. And in between spinning wheels, I made rifles stock. It was then at the New York State Fair that Al Hauser saw one of the 1st Place wheels. He was working at Hart Barrels at the time. He thought I should be making rifle stocks, too.. all while I had a motorcycle dealership, a grade school kid and continuing to making spinning wheels. I think it all worked out and has come a full circle.

This is the same grip pattern I use for the tube guns, but it has been modified for an AR-15 chassis. Safety detent and safety lever have been changed so that the safety lever can rotate. Each grip is customized for each user. I’m real old school when doing this and have been for 20 years. I go off of a tracing of the hand, like a 1st grade Thanksgiving turkey drawing. I have found out that they need to be snail mailed to me… not scanned.. not emailed.. not from a copier.. not from a fax. Regular old pen/pencil/crayon tracing put in an envelope with an actual stamp. 🙂

I have had this stock in my collection for awhile. I was contacted by someone who wanted to know if his Rebel Defiance Drop Port Action would fit. He was looking for Koa and I remember that I had this stock on hand.  I blued the pillars and as you can see, the receiver matches.  I made the drop port and the escutcheon.

Here we have an example of a polished action. in order to match the action, I polished the rest of the metalwork on this rifle.

A client asked me to customize a stock for him. He sent me a stock that he had and liked and a fiddleback maple & walnut blank that he had previous found. I put them in the duplicator and the following happened.

The 2 pictures of the back of the stock show the prism effect of the curly maple.

This stock is made to fit four other Savage actions, note the use of the bedding block.

Cutting a pillar to mate with the Savage action.

This is just waiting for its new owner to come and get it.

This is using a bedding block that I make.

I’ve post a bunch of barrels and items on Accurate Shooter Forum.

You can find my profile and look under postings here: My Profile.

Another Grip finished.

These grips can be custom made for your hand. They can be made to fit a AR-15, AR1-10, Eliseo’s and other metal stocks.

Got a little head of myself and sent off the finished grip without finally pictures.

I’m working a few more, promise to get final pictures!

Clare here.

When I’m in town or not (over the phone), I try to help out posting on this blog (you can blame the spelling errors and broken links on me) for Doan.. who I affectionally call Dad, Pops and a long list of other names.

Well, today he is celebrating his 56th 21st Birthday.

Happy Birthday, Dood!