Doan Trevor Custom Rifle Building » Palma

Gustin Canted Stock Inletting for a K. Kenyon Barreled Action

Sue — Wed, 13 Jul 2011 01:02:34 +0000

This is a Karl Kenyon action. I am not sure how many he made. I am hoping to have this completed for the Made in America Match at Camp Perry July 24th through 28th.

Tagged: 22 Rimfire / Smallbore, Bedding, Camp Perry, Competition Shooting, Custom Rifle Building, Custom Rifles, Duplicating, F-Class, Inletting, Machining, Metalworking, Milling Machine, Palma, Rifle, Rifle Stock, Target Shooting, Woodworking

Gustin Canted Rifle Stock Preparation for Duplicating

Doan — Tue, 12 Jul 2011 02:49:18 +0000

Due to the shape and configuration of the stock, another piece of wood needed to be laminated to the blank. Steve McGee supplied the original blank.

Tagged: 22 Rimfire / Smallbore, Competition Shooting, Competitive Shooting, Custom Rifle Building, Custom Rifles, Duplicating, F-Class, Long Range, Palma, Rifle, Rifle Stock, Smallbore, Target Shooting, Woodworking

Wayne Forshee wins Second Day Rocky Mountain Palma match

Doan — Mon, 11 Jul 2011 16:26:54 +0000

Congratulations to Wayne Forshee, winner of the second day of the Rocky Mountain Palma match in Raton, New Mexico on July 7th.

Wayne used one of the stocks that I made, and it was featured here on my website many moons ago

Tagged: 22 Rimfire / Smallbore, Competition Shooting, Competitive Shooting, CSS Stock, Custom Rifle Building, Custom Rifles, F-Class, Inletting, Long Range, Machining, Metalworking, Milling Machine, Palma, Pistol Grips, Rifle, Rifle Stock, Smallbore, Target Shooting, Trigger Guard, Woodworking

English Walnut Pistol Grips

Doan — Mon, 04 Jul 2011 16:35:26 +0000

To be used on one of Gary Eliseo’s Tube Guns. These are some of the leftover pieces that I glued together from the 52 Sporter. The owner was interested to see if I could make some matching grips for his tube guns. Since they cannot be put through the duplicator, they will be hand carved.

Tagged: 22 Rimfire / Smallbore, AR15, Competition Shooting, Competitive Shooting, CSS Stock, Custom Rifle Building, Custom Rifles, F-Class, Grips, Palma, Pistol Grips, Rifle, Rifle Stock, Sporting Rifles, T2K, Target Shooting, Tubb Gun, Tube Gun, Woodworking

Why a Custom Rifle Stock is so Expensive

Doan — Thu, 30 Jun 2011 02:31:43 +0000

I’ve been drying this blank for over a year and a few days ago I cut it to rough shape. After it was cut, it started ‘checking’. You just never know when this will happen, and it can ruin a beautiful piece of wood.

“Checking, the separation of continuous wood fibers, is a naturally occurring consequence of the seasoning process of wood. The outer fibers lose moisture to the surrounding atmosphere and attempt to shrink, but the inner portion of the timber member loses moisture at a much slower rate. The different rates of shrinkage can cause the wood to check or split. Rapid drying increases the differential moisture content between the inner and outer fibers and thus increases the propensity for checking in the timber. The checking (and shrinkage) process will stabilize as the moisture content of the member reaches equilibrium with the surrounding environmental conditions.”

Source http://www.apawood.org/glu_level_b.cfm?content=prd_glu_gen_check

Tagged: 22 Rimfire / Smallbore, Bedding, Competition Shooting, CSS Stock, Custom Rifle Building, Custom Rifles, F-Class, Inletting, Long Range, Palma, Rifle, Rifle Stock, Smallbore, Target Shooting, Woodworking

F-Class Low Rider

Doan — Sun, 02 Jan 2011 03:51:09 +0000

Checking the fit of the bedding block in the stock. The bedding block will also add rigidity to the stock.

Machining the bedding block for BAT action

Tagged: Bedding, Competition Shooting, Competitive Shooting, Custom Rifle Building, Custom Rifles, F-Class, Inletting, Long Range, Machining, Metalworking, Palma, Rifle, Target Shooting, Woodworking

Finished English Walnut Palma Rifle Stock

Doan — Tue, 28 Dec 2010 17:49:25 +0000

Tagged: Competition Shooting, Competitive Shooting, Custom Rifle Building, Custom Rifles, Grips, Inletting, Long Range, Machining, Metalworking, Milling Machine, Palma, Pistol Grips, Rifle, Rifle Sights, Rifle Stock, Smallbore, Target Shooting, Woodworking

Offset Sight Bases for Scope Prototype #2

Doan — Wed, 22 Dec 2010 04:32:15 +0000

I have found that it was more difficult to use the scope than the iron sights, so I am making a set of offset sights for the scope.

Tagged: 22 Rimfire / Smallbore, AR15, Competition Shooting, Competitive Shooting, CSS Stock, Custom Rifle Building, Custom Rifles, F-Class, Long Range, Machining, Metalworking, Milling Machine, Palma, Rifle, Rifle Sights, Scope Rails, Smallbore, Space Gun, T2K, Target Shooting, Trap Shooting, Tubb Gun, Tube Gun

Offset Sight Bases for Scope Prototype #1

Doan — Tue, 21 Dec 2010 05:09:10 +0000

Tagged: 22 Rimfire / Smallbore, AR15, Competition Shooting, Competitive Shooting, Custom Rifle Building, Custom Rifles, F-Class, Machining, Metalworking, Milling Machine, Palma, Rifle, Rifle Sights, Scope Rails, Smallbore, Target Shooting, Trap Shooting, Tubb Gun, Tube Gun, Veteran's Palma Team Raffle Rifle

US National Rifle Team Award

Sue — Thu, 16 Dec 2010 03:37:59 +0000

Presented to Doan in Phoenix at the Arizona State Palma Champtionship Match on December 5, 2010.

“Many years ago I acquired the rifle that Danny Sanchez shot in the Palma match that was won by the US. I hope to see that happen again. Thank you to the US Rifle Team and Good Luck!”

~Doan

Tagged: Competition Shooting, Competitive Shooting, Custom Rifle Building, Machining, Metalworking, Palma, Rifle, Rifle Stock, Target Shooting, Veteran's Palma Team Raffle Rifle, Woodworking